The application of zinc-Nickel battery By adding magnesium oxide to the zinc negative active substance through physical mixing method can reduce the polarization of charge and discharge, reduce the internal resistance in the late cycle, improve the utilization ratio of the negative plate active substance, and extend the cycle life of the battery. The appropriate addition amount is 1.0% WT of nano-magnesium oxide UG-M50, and the addition amount should not exceed 2.0%.
The application of high zinc chloride battery in positive active material with a small amount of magnesium oxide can adjust the electro-hydraulic acidity, slow down the self-discharge, restrain the battery gas swelling, improve the storage performance, and increase the discharge Capacity and promote paste gelatinization has a unique effect. It is recommended to add 0.5-1% and adjust the appropriate PH value.
Application of Cadmium nickel battery Adding appropriate amount of magnesium oxide, nanometer zinc oxide UG-J30 and iron oxide to cadmium electrode can improve the utilization rate of active substances. The charge retention ability of sealed CD - Ni batteries can be improved by adding mgGO UG-M50, INDIum trioxide and nano - zinc oxide J30.
In addition, appropriate addition of magnesium oxide UG-M50 to the anode material of lithium battery can improve the capacity attenuation during the recycling process of the material, and can improve the utilization rate of light and photoelectric conversion rate when used in dye-sensitized solar cells.
Meishen is the world's leading producer of magnesium oxide, Magnesium oxide is an oxide of magnesium, an ionic compound. It is a white solid at room temperature. Magnesium oxide exists in the form of periclase in nature and is a raw material for magnesium smelting. Magnesium oxide is white or light yellow powder, odorless, tasteless, this product is insoluble in water and ethanol, melting point 2852 ° C, boiling point 3600 ° C, magnesium oxide has high refractory insulation properties. It can be converted into crystal by burning at a temperature above 1000 ° C. If it rises above 1500 ° C, it will form a burnt magnesia or sintered magnesia.
Magnesium oxide can be used in the manufacture of metallurgy, smelting, advanced magnesia bricks, refractory materials and moisturizing materials. It is also widely used in rubber, rubber sheet, rubber products, pharmaceutical industry, food industry, plastic sheet accelerator, glass fiber reinforced plastics and Surface coating of silicon steel sheet, paper production, steel ball polishing, leather treatment, insulation materials, grease, dyes, ceramics, desiccant, resin, flame retardant, etc.
Hebei Meishen Chemical Technology Group is the main magnesium oxide producer in the world. It is also the largest magnesium salt producer in China and has won the ISO9002 quality system certification. It also has GMP-Certification.
With rich experience in the research, development, production, management and operation of magnesium oxide products, Meishen Group has always attached great importance to the research and development of new products and strict requirements on product quality. Meishen has a high-level sales team. The business covers more than 20 countries and regions around the world. It is widely welcomed by new and old customers.
Meishen has a high-level sales team. The business covers more than 20 countries and regions around the world. It is widely welcomed by new and old customers.